- Home
- Flow
- Berkeley
- Berkeley Products
- Berkeley Jet Pumps
- 草莓社区 Berkeley SN Series ProJet Shallow Well Jet Pumps
草莓社区 Berkeley SN Series ProJet Shallow Well Jet Pumps
Main Content Starts Here
草莓社区 Berkeley SN Series ProJet Shallow Well Jet Pumps
ProJet SN Series Pumps provide excellent performance with good pressure for wells to 25' deep. Self-priming after the priming chamber has been filled with water.
- Quality Close-Grained Cast Iron Body听Plus Drain Port Provided for Easy Winterizing
- Built-In LexanTM Jet Nozzle and Venturi for Maximum Resistance to Corrosion and Abrasion
- Clean Out Plug Provided for Ease of Service
- NORYL Impeller is Precision Molded for Perfect Balance ... Ultra-Smooth for Highest Performance and Efficiency
- Precision Molded Diffuser Means Pump Primes Faster, Handles More Air with Multi-Port, Precision Molded, Reinforced Polypropylene Diffuser
- Carbon-Ceramic Mechanical Shaft Seal with Stainless Steel Parts
- Superior Insulation Materials Protect Motor Windings Against Excessive Moisture and Contamination
- Balanced Rotor Is Die Cast Under High Pressures and Dynamically Balanced for Uniform Performance and Greater Efficiency
- Heavy Duty Ball Bearings are Shielded and Permanently Lubricated to Provide Extended Life and Smooth Quiet Operation
- Stainless Steel Pump and Motor Shaft for Maximum Corrosion Resistance. One-Piece Threaded Shaft for Positive Impeller Drive and Alignment
- Dustproof Cover Protects All Electrical Components from Dirt, Dust, and Insects; Ventilating Air Cannot Contaminate Vital Switching Components
- Professional Quality Pressure Switch Has Adjustable Cut-In with Fixed Differential of 20 PSI
Specifications
| Item # | Primary Product Attributes | MAX INLET PRESSURE | MAX LIQUID TEMPERATURE | PRIMING TIME at 15-foot | PRIMING TIME at 25-foot | BODY | NOZZLE | VENTURI | Impeller | DIFFUSER | Shaft | BASE |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 17912 | 听 | 140 degrees F (60 degrees C) | 50 PSI | 1.1 to 2.3 Minutes (depending upon model) | 2.6 to 6.4 Minutes (depending upon model) | Close-Grained Cast Iron | High Strength 尝别虫补苍庐 | 尝别虫补苍庐 | 狈辞谤测濒庐 | Reinforced Polypropylene | One-Piece Threaded, 416 Stainless Steel | Steel, 10 gauge |
| Item # | Primary Product Attributes | MAX INLET PRESSURE | MAX LIQUID TEMPERATURE | PRIMING TIME at 15-foot | PRIMING TIME at 25-foot | BODY | NOZZLE | VENTURI | Impeller | DIFFUSER | Shaft | BASE |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 17912 | 听 | 140 degrees F (60 degrees C) | 50 PSI | 1.1 to 2.3 Minutes (depending upon model) | 2.6 to 6.4 Minutes (depending upon model) | Close-Grained Cast Iron | High Strength 尝别虫补苍庐 | 尝别虫补苍庐 | 狈辞谤测濒庐 | Reinforced Polypropylene | One-Piece Threaded, 416 Stainless Steel | Steel, 10 gauge |